Bits N Bobs: Copper Pans

My bit of copper: Turquoise Enamelled Copper Heart Pendant. Pendant & Photo by Emily Wiser

I've been shopping for copper pots and pans, and I've found they are so expensive! I was quite shocked. $250 for a copper frying pan? I could make one for a lot less. I do have all the hammers I would need. It's pretty simple to make a copper frying pan (without handle), but it takes a lot of muscle and a lot of heat. Basically, you hammer until the copper is too tough, then you heat it to soften, then hammer again, and so on. Eventually, it takes the shape of a pan. It's slow going, but might make a good gift for the cook in your family.

Supplies:
1) A really big anvil with horn
2) Assorted smithing hammers
3) A really big blow torch
4) Safety glasses, hearing protecting, ibuprofin.

How To Get More Twitter Followers

Sterling silver & aquamarine briollette earrings. Earrings & photo by Emily Wiser.

I know a lot of my readers are also Etsy sellers. So, I'll share some tips on how to get more Twitter followers.
1) Reciprocate. This means following people back and retweeting people who tweet you first.
2) Participate in Follow Friday. Type #FF and then @TwitterName to tell all your followers.
3) No Bots! Don't use any of the bots to send automated tweets. Don't you always hang up on those computerized telemarketing calls? People don't want to read robot tweets.
4) Twitter client. I use Tweetdeck. It works great. It allows you to make columns so you can actually sort and read your tweets.
5) Conversation. Don't just spam people. Tell them about yourself. Talk about something else once in a while besides what you're selling.

Soldering Fun

Silver solder chips on firebrick. Photo by Emily Wiser.

Soldering sterling silver is a fun process. Above, I've taken a photo of one of my firebricks. I put sterling rings on the firebrick, heat the ring, then melt one of the silver solder chips you see in the photo. The solder balls up, and I can pick it up with my pick and drop it onto the ring. At the very end, you get a beautiful sterling silver stacking ring (see below).

Sterling silver stacking ring. Ring & photo by Emily Wiser.

In The Studio: Adventures in Enameling

Turquoise enameled copper scrap on tripod. Photo and enameling by Emily Wiser

I'm trying enameling for the first time. No teachers. No guidance. I'm learning on my own. But, I did find a great article at ganoskin.com. Here's a picture of my first enameling attempt. (Well, it's not really my first, but it's my first successful one, LOL.)

This is a piece of copper sitting on a steel screen. The screen is set on a tripod. I applied the turquoise opaque enamel 4 times, fixing it with Pantene hairspray. I heated it each time with a propane torch from underneath. I got the really deep color by adding a 5th layer of translucent turquoise enamel.

I'm going to make some cute enamel disc earrings and enameled flowers. Pictures soon!

Sterling Silver Stacking Ring Celebration!

I'm having a sterling silver stacking ring celebration! 9 sterling silver stacking rings for $45 plus free shipping to the U.S. and Canada. I love hammering out these little rings.

Do you want to know how I make these rings? Here's instructions on how to make sterling silver stackable rings!

Materials Needed:
16 gauge sterling silver round wire, half-hard
blow torch, propane or butane
fire brick or soldering pad
jewelry pickle (see my organic pickle recipe) in a crockpot
jewelry tumbler with steel shot and ivory soap chips
silversmith's anvil
silversmith's hammer
steel ring mandrel
jeweler's file
400 grit sandpaper
600 grit sandpaper
jeweler's cutting pliers or jeweler's saw
hard silver solder (you can use sheet, wire, or paste. i'm using sheet solder)
flux
copper tongs

Instructions:
1. With the cutting pliers, cut the length of sterling silver 1-2 sizes smaller for the ring size you want using a ring sizing chart.
2. File the ends of the wire with the jeweler's file.
3. Bring the ends together to form a circle.
4. cut a silver solder chip and put it underneath the ring.
5. spray the flux on the ring or dab flux on using a paintbrush
6. Heat ring with a blowtorch in a circular motion.
7. Wait for ring to cool, then put in hot pickle.
8. Once ring is shiny again, take it out of the pickle using copper tongs. You must use copper, not any other metal tongs, for this.
9. Sand or file any rough edges.
10. Hammer the ring on the anvil horn to get a rough shape
11. Hammer the ring on the ring mandrel to get the size
12. Lay the ring flat on the anvil. Tap it gentle to make sure that it is straight when it lies flat. This is called "trueing" the ring.
13. Put the ring in the jewelry tumbler half full of water and add ivory soap flakes. Tumble for a half hour.

Your ring is done!