Bits N Bobs: Copper Pans

My bit of copper: Turquoise Enamelled Copper Heart Pendant. Pendant & Photo by Emily Wiser

I've been shopping for copper pots and pans, and I've found they are so expensive! I was quite shocked. $250 for a copper frying pan? I could make one for a lot less. I do have all the hammers I would need. It's pretty simple to make a copper frying pan (without handle), but it takes a lot of muscle and a lot of heat. Basically, you hammer until the copper is too tough, then you heat it to soften, then hammer again, and so on. Eventually, it takes the shape of a pan. It's slow going, but might make a good gift for the cook in your family.

Supplies:
1) A really big anvil with horn
2) Assorted smithing hammers
3) A really big blow torch
4) Safety glasses, hearing protecting, ibuprofin.

In the Studio: Enamelled Copper Pendants

Torch-fired blue enamel copper pendant on sterling silver chain. Pendant & photo by Emily Wiser.

I'm very happy to show you my new enamelled copper pendants! I've done a lot of research on torch-firing enamel (which is different from the traditional kiln firing). I've also done some experimenting, and I've finally come out with my new turquoise enamelled copper disc pendant on a sterling silver chain.

I'm very excited about torch-firing, and I plan to do a lot of experimenting with colors. I've read that one of the bonuses of torch-firing (as opposed to kiln firing) is that the colors are more "organic"--you get different colors depending on the type of fuel you use. You can even change colors a little bit if you break the rules and heat directly on the enamel. It promises to be a lot of fun!

In The Studio: Engraving Copper Plates

Above: Gravers, India Stone (for sharpening gravers). Photo & gravers by Emily Wiser

I recently took an engraving class, where we learned to engrave copper plates by hand. It's great practice for my engraved book and for learning to hand-engrave jewelry. You can also set stones with gravers. We had to make our own gravers. Here's some photos of my engraving tools. my copper plate, and the print I made from it.

Above: Engraved Copper Plates. I engraved them by hand with the gravers shown above. Photo & plates by Emily Wiser.

Above: A block print from the engraved copper plate. I inked it by hand, wet paper, and pressed it down on the engraved plate.
Photo & print by Emily Wiser.

In The Studio: Adventures in Enameling

Turquoise enameled copper scrap on tripod. Photo and enameling by Emily Wiser

I'm trying enameling for the first time. No teachers. No guidance. I'm learning on my own. But, I did find a great article at ganoskin.com. Here's a picture of my first enameling attempt. (Well, it's not really my first, but it's my first successful one, LOL.)

This is a piece of copper sitting on a steel screen. The screen is set on a tripod. I applied the turquoise opaque enamel 4 times, fixing it with Pantene hairspray. I heated it each time with a propane torch from underneath. I got the really deep color by adding a 5th layer of translucent turquoise enamel.

I'm going to make some cute enamel disc earrings and enameled flowers. Pictures soon!